I picked up a Swann HD-820CAM (NHD-820)
SWANN SWNHD-820CAM-US 1080p HD Network Security Camera for Swann’s 1080p NVRs
Manufacturer Link: http://www.swann.com/us/swnhd-820cam
You don’t need a Swann receiver to use it.
Plug it into a switch that supports PoE. I’m using this one and can confirm it will run the IP Camera:
TP-LINK TL-SF1008P 10/100Mbps 8-Port PoE Switch, 4 POE ports, IEEE 802.3af, 53W
Set your computer to an IP in 192.0.0.0/24 (i.e. 192.168.0.200) and go to 192.0.0.64 in your browser. That’s the default IP of the camera.
Username is admin
Password is 12345
You can change it’s IP in the web management to whatever you want.
Media->Open Network Stream
type in one of the following:
Main (1st) Stream (720p or 1080p)
rtsp://YOUR_CAMERA_IP/Streaming/channels/1
Sub (2nd) Stream (240p or 480p)
rtsp://YOUR_CAMERA_IP/Streaming/channels/2
I can also confirm that Wowza Streaming Engineย will read in the RTSP streams above and properly converts them to RTMPย (which is what Flash requires).
Here’s all the screens in the web management:
